UM E-Theses Collection (澳門大學電子學位論文庫)
Title
Shear correction factor for FGM plate based on thickness shear vibration
English Abstract
Functionally graded materials have continuous variation of material properties from one surface to another, which is different from the stepped or discontinuous composite material. The gradation of properties in FGM reduces the thermal stresses, residual stresses, and stress concentrations found in traditional composites. Due to the high quality of the FGM, it meets the requirement of the growing new technologies especially in aerospace, microelectronics, biomechanical, nuclear engineering and so on. The first order shear deformation theory (FSDT) is a high efficient and convenient method for analyzing the moderate thick plates. But the shear correction factor of plate is a necessary parameter in FSDT to cater the non-uniformed shear strain in transverse section. The shear correction factor of homogenous plate is not suitable for the FGM plate, as the variation of material properties is not considered in the theory. This thesis gives a convenient and effective method to obtain the shear correction factor for FGM plates based on thickness shear vibration. Thickness shear vibration is an in-plane vibration of infinite plates characterized by shear deformation. The frequencies of thickness shear vibration of an infinite FGM plate according to three-dimensional theory of elasticity is determined by Galerkin method. The shear correction factor can then be obtained by matching the fundamental frequencies of thickness shear vibration obtained by three-dimensional theory of elasticity and by FSDT. Parametric studies of the shear correction factor with the variation of material properties, such as the mass density ratio, the Young’s modulus ratio and the material index are discussed. Both the FGM plates and sandwich FGM plates are considered. The results show that the shear correction factor for FGM plates with the material index larger than 1 vi is small than π 2 /12 which is the shear correction factor for homogeneous plates. The comparisons of the shear correction factor from presented method and from the other method are also presented. The relative difference of shear correction factor is increased when the Young’s modulus ratio 𝑅𝑦 increase. It is observed that the Young’s modulus ratios 𝑅𝑦 have bigger influence on the shear correction factor in the thickness shear vibration method. The relative difference of shear correction factor is decreased when the mass density ratio 𝑅𝑚 increase, it means that the relative difference of shear correction factor will be very small when the proper value of 𝑅𝑚 has been used. Using the present shear correction factor and the first-order shear deformation theory, the free vibration frequency of simply-supported rectangular FGM plates is determined by the Navier’s solution method. Comparison studies are given for the frequency parameters obtained by different shear correct factors and by different numerical model.
Issue Date
2012
Author
Cao, Hang Yu
Faculty
Faculty of Science and Technology
Department:
Department of Civil and Environmental Engineering
Degree
M.Sc.
Subject
Civil Engineering -- Department of Civil and Environmental Engineering
Vibration
Shear (Mechanics)


Supervisor
Iu Vai Pan
Library URL
b2736413
Files In This Item:
TOC & Abstract
Full-text
Location
1/F Zone C
Supervisor
--